Hammer test

Centre of Excellence in Measurements Technologies

Experts in measurements, diagnostics, mechanical and electronic design and software development.
We design and make standard and customized measurement equipment

img

Products

Our Products in the field of Residual Stresses and Cultural Heritage

Click To Read More

img

Services

Your partner in field measurements, testing and diagnostics. Rely on expert engineers and high accuracy test instrumentation. Find your application among the mechanical, thermodynamic and residual stress testing departments

Click To Read More

img

Integrated Solution

Specialized software solutions for data analysis. Customizable diagnostic and monitoring systems.

Click To Read More

Mission

As a leading company in measurement and testing, the mission of SINT Technology is to offer tailor-made solutions to its customers.
When flexibility is needed, we provide support to companies operating worldwide in several industrial sectors, ensuring quality of services, fast response and the expertise of our technicians.

Read more
123

News & Events

SINT Technology at the 5th Historic Mortars Conference, 19th -21st June, Pamplona

SINT Technology will be present at the at theĀ 5th Historic Mortars ConferenceĀ which will take place in Pamplona from 19th - 21st June 2019. The HMC 2019 is open toĀ scientists, architects, restorers, conservators, historians, archaeologists,ā€¦

Participation of SINT Technology at the MCM Milano, San Donato Milanese 18th April 2019

SINT Technology will participate at the 14thĀ edition of theĀ MCM MilanoĀ which will be held at the Crowne Plaza Hotel in San Donato Milanese, Ā on 18thĀ April 2019. The eventā€™s program includes Ing. Luca Santucciā€™s speech entitledĀ ā€œConditionā€¦

Por Creo Fesr 2014-2020 ā€“ Obtained financing for supporting innovation and development services

SINT Technology announces to have obtained the financing from Regione Toscana related to the Announcement ā€œPor CreO Fesr 2014-2020ā€, a project aimed to support innovation and development.

SINT Technology at the NISummit Italy, 8th November 2018

SINT Technology will be present at the new edition ofĀ NISummit 2018, which will take place in Milan, on November 8th. NISummit 2018 is the new NI event that comes from the union of NIDays and the vertical Aerospace & Defense and Automotiveā€¦

Participation of SINT Technology at the ECRS-10 in Leuven on 11-14 September, 2018

SINT Technology will participate at the 10thĀ edition of the European Conference on Residual Stresses ECRS-10, that will take place inĀ Leuven, Belgium, onĀ 11-14 September, 2018. ECRS is a well-established conference series dealing withā€¦

A new article from SINT Technology has been published on the ASTM Journal

A new article from SINT Technology entitled "Improvements in the Hole-Drilling Test Method for Determining Residual Stresses in Polymeric Materialsā€ has been published on the ASTM Journal. For more information you can visit:Ā https://wwwā€¦

SINT Technology at The 5th China National Conference and International Seminar on Shot-Peening Technologies - June 11th- 14th 2018, Shanghai

SINT Technology will participate at The 5th China National Conference and International Seminar on Shot-Peening Technologies which will take place in Shanghai from June 11th to 14th 2018. The conference will focus on shot peening technologiesā€¦

A new article on Ring-Core Method written by SINT Technology in cooperation with Pisa University

SINT Technology in cooperation with Pisa University has published a new article entitled "Integral method coefficients for the ring-core technique to evaluate non-uniform residual stresses". For more information you can visit:Ā journals.ā€¦

SINT Technology at InArt, March 26th -29th 2018, Parma

SINT Technology will be present at the 3rd International Conference ofĀ InArtĀ (Innovation in Art Research and Technology) to be held in Parma fromĀ 26thĀ -29thĀ MarchĀ  2018. The Conference scope is to create a bridge of communication betweenā€¦

SINT Technology at the National Instrument Days, November 14th 2017, Milan

SINT Technology will be present at the new edition ofĀ NIDays 2017, which will be held at Atahotel Expo Fiera Pero in Milan, on November 14th. The event is entirely dedicated to the graphic design of systems, with the presence of an exhibitionā€¦

SINT Technology at the Residual Stress Summit 2017 - October 23rd- 26th, Dayton

SINT Technology will participate in the nextĀ Residual Stress Summit, to be held on Monday-ThursdayĀ October 23rd-26th 2017Ā at the University of Dayton Research Institute, Dayton, USA. The central objective of the Residual Stress Summitā€¦

SINT Technology at the Chinese National Residual Stress Conference 2017 - October 16th-19th 2017

SINT Technology will participate in the nextĀ Chinese National Conference and International Symposium on Residual Stress, to be held from the 16th to the 19th of October in Hangzhou, China. This is the most important event in the Residualā€¦

Por Creo Fesr 2014-2020 ā€“ Obtained financing for supporting innovation and development services

SINT Technology announces to have obtained the financing from Regione Toscana related to the Announcement ā€œPor CreO Fesr 2014-2020ā€, a project aimed to support innovation and development.

Por Fesr 2014-2020 - Support for the acquisition of services for innovation ā€“ Announcement

SINT Techonology informs that Regione Toscana has launched a new invitation to tender in order to support companies to acquire services for innovation. To know more on this project, you can read the full announcement at the followingĀ liā€¦

Gas turbine performance testing - District heating plant of Oradea, Romania

SINT Technology has been involved in the field performance testing activities on a new gas turbine installed in Oradeaā€™s district heating plant in north western Romania. Our scope of supply was the verification of turbine power output,ā€¦

Compressor performance test - Compression station of Yopal, Colombia

SINT Technology was successfully involved in the field performance testing activities on a new centrifugal compressor installed in the Equion compression station of Yopal, Colombia. Unit performances have been evaluated according to the internationalā€¦

SINT Technology at the National Instrument Days, February 18th 2016, Milan

SINT Technology will be present at the new edition ofĀ NIDays 2016, which will be held at Atahotel Expo Fiera Pero in Milan,Ā nextĀ February 18th. The event is entirely dedicated to the graphic design of systems, with the presence of exceptionalā€¦

Experimental Modal Analysis: our new website is online

SINT Technology decided to enrich its online comunication creating a website completely dedicated to experimental modal analysis. Modal Analysis is a core service that SINT Technology can provide its customers (company, industries) for describing,ā€¦

Article Publication on CompressorTech2

SINT Technology article "SINT Technology Field-testing Compressor Performance" written by Andrea Nicoletti has been published inside Compressor Tech2, publication dediclated to Gas Compression products & Application. Here the completeā€¦

Participation of SINT Technology at PowerGen, 9-11 June 2015, Amsterdam

SINT Technology will be present atĀ Powergen Europe, that will be held from the 9th to theĀ 11th of June 2015 in Amsterdam,Ā Netherland. POWER-GEN is the largest annual conference that is going to be held in Europe on 2015.Ā  It will takeā€¦

Seminar in Acoustic tests in collaboration with SIEMENS (LMS)

Thursday, February 26th, 2015 at SINT Technology headquarter, in Calenzano, will be held the seminar in Acoustic tests, in collaboration with SIEMENS (LMS). This seminar is therefore dedicated to those who want to learn to deal with noiseā€¦

Participation of SINT Technology at the European Conference on Residual Stresses - July 7-10, 2014

SINT Technology will participate in the next ECRS, European Conference on Residual Stresses, as an established company in the field of Residual Stress measurement. The 9th edition of ECRS will be held in Troyes, France, July 7-10, 2014: itā€¦

SINT Technology LAB: Enlargement of the Accreditation ISO / IEC 17025: 2005

SINT Technology Laboratory obtained the extension of ACCREDIA accreditation last 8th May 2014 with Certificate No. 0910. The list of tests for which the laboratory is accredited can be found on the official accreditation (www.accredia.it).ā€¦

Esami di primo e secondo livello in estensimetria 15 - 16 Aprile 2014

Gli esami di estensimetria, successivi ai corsi, permettono di ottenere la certificazione del personale addetto alle prove non distruttive, metodo ST, in conformitĆ  alla norma ISO 9712:2005. Gli esami comprendono parti teoriche e pratiche:ā€¦

Seminar on Experimental Modal Analysis and Correlation FEM

Thursday, October 10th, 2013 at SINT Technology headquarter, in Calenzano, will be held the seminar in Experimental Modal Analysis and Correlation FEM, in collaboration with LMS. During the seminar, after a general presentation of LMS, youā€¦

Participation of SINT Technology in the 17th Chinese National Residual Stress Conference - October 28-31, 2013

SINT Technology will participate in the nextĀ Chinese National Conference and International Symposium on Residual Stress, to be held from the 28th to theĀ 31st of October in Shanghai, China. This is the most important event in the Residualā€¦

Participation of SINT Technology in the Residual Stress Summit 2013 - October 7-10, 2013

SINT Technology will participate in the nextĀ Residual Stress Summit, to be held on Monday-ThursdayĀ October 7-10, 2013Ā at the Hilton Garden Inn Idaho Falls, in Idaho Falls, USA. The aim is to provide participants with the highest technicalā€¦

New Headquarters SINT Technology

SINT Technology is proud to announce that from the 1st of January, 2013 the company has moved to the new headquarters located in Via delle Calandre, 63 - 50041 Calenzano (Florence). The new headquarters are divided in different areas (technicalā€¦

Corsi di estensimetria di livello 1 e 2. Dal 4 - 8 Marzo 2013

Il corso viene tenuto da istruttori di livello 3 certificati CICPnD. Il corso estensimetria ĆØ valido per lā€™ammissione agli esami di livello 1 e 2 per la Qualificazione e certificazione del personale addetto alle prove non distruttive, metodoā€¦

ICRS 9 ā€“ International Conference on Residual Stresses - October 7-9, 2012

SINT Technology will partecipate as main sponsor in the 9th International Conference on Residual Stresses that will take place in Garmisch-Partenkirchen, Germany, from the 7thĀ to the 9thĀ of October 2012. The conference provides a key forumā€¦

Welcome in Sint Technology brand new web site

SintTechnology is a company specialized in mechanical and electronic design, manufacturing and supply of special equipment and production of measuring equipment for special applications.

Participation of SINT Technology in the ECRS-8

SINT Technology will participate in the next European Conference on Residual Stresses, ECRS-8, that will take place at Riva del Garda (Trento, Italy) next June 26-28, 2010. ECRS8 is the forum where the main advancements and new resultsā€¦

Esami di primo e secondo livello in estensimetria

Periodo esame I livello: 18 Marzo 2010 Periodo esame II livello: 18-19 marzo 2010 Sede esami: Art Hotel MirĆ², Via degli Olmi 7, 50041 Calenzano (FI) Costo esame I livello: ā‚¬ 700/candidato Costo esame II livello: ā‚¬ 900/candidato Maggioriā€¦

ISO/IEC 17025:2005 accreditation attained by the SINT Technology laboratory

SINT Technologyā€™s laboratory was accredited by SINAL (ā€œNational System for the Accreditation of Laboratoriesā€) on 25 February 2009 with Certificate no. 0910. The list of tests for which the laboratory is accredited may be consultedā€¦

RESTAN-MTS3000: New partnership SINT-HBM

From June 2008 the companies SINT Technology and HBM have established a new partnership concerning the sale of the automatic system for measuring residual stress RESTAN-MTS3000 (more details on this product in the section "Off-the-shelfā€¦

Level I and Level II Strain Gage Measurement Examinations

Level I examination period: 28-29 November 2006 Level II examination period: 28-29 November 2006 Location of examinations: Hotel Delta Florence, Via Vittorio Emanuele 3, 50041 Calenzano (FI) Cost of level I examination: ā‚¬ 530/candidate Costā€¦

Level I and Level II Strain Gage Measurement Courses

Level I course period: 6-8 November 2006 Level II course period: 6-10 November 2006 Location of courses: Hotel Delta Florence, Via Vittorio Emanuele 3, 50041 Calenzano (FI) Cost of level I course: ā‚¬ 920/candidate, including 3 mealsā€¦

Corsi di primo e secondo livello in estensimetria

Periodo corso livello 1: 6-8 Novembre 2006 Periodo corso livello 2: 6-10 Novembre 2006 Sede corsi: Hotel Delta Florence, Via Vittorio Emanuele 3, 50041 Calenzano (FI) Costo corso livello 1: ā‚¬ 920/candidato, comprensivo di 3 pasti duranteā€¦

Integrated services for greenhouse gas (GHG) emissions, according to Kyoto protocol

SINT Technology offers an integrated service for the operators of installations subject to the EU Emisssions Trading Scheme who are responsible for planning and monitoring greenhouse gas emissions. It is therefore necessary to have establishedā€¦

Uncertainty of measurements in thermoelectric power plants

SINT Technology is completing a campaign conducted in 24 thermoelectric power plants throughout Italy involving evaluation of the uncertainties of measurement of thermal cycle fuel supply and steam flow rates. Evaluation of the uncertaintyā€¦

Accreditation of SINT Technology as an Energy Saving Company

SINT Technology has been accredited an Energy Saving Company (ESCO) by the Electricity and Gas Authority. In such a capacity it is entitled to apply for verification and certification of energy savings achieved through projects implemented inā€¦

DRMS Cordless Light

The new version of the system is an update of the previous model, introduced at the beginning of 2005. A number of components are now made of rigid plastic (ertacetal), making the system even lighter and bringing the total weight down toā€¦

Level I and Level II Strain Gage Measurement Examinations

Level I examination period: 3-4 November 2005 Level II examination period: 3-4 November 2005 Location of examinations: Hotel Delta Florence, Via Vittorio Emanuele 3, 50041 Calenzano (FI) Cost of level I examination: ā‚¬ 530/candidate Costā€¦

Level I and Level II Strain Gauge Measurement Courses

Level I course period: 17-19 October 2005 Level II course period: 17-21 October 2005 Location of courses: Hotel Delta Florence, Via Vittorio Emanuele 3, 50041 Calenzano (FI) Cost of level I course: ā‚¬ 920/candidate, including 3 mealsā€¦

XXXIV National Conference of the AIAS

SINT Technology is to be at AIASā€™s 34th National Conference where it will be giving a presentation on ā€œEvolution of high-speed drilling technology for evaluating residual stresses by the hole-drilling strain gage methodā€ and have exhibitionā€¦

Course ā€œMeasurement processes and practiceā€

The course is organized by Assindustria Firenze and will be held by Emilio Valentini. The purpose of the course is to provide the information necessary for correct performance of measurement processes and proper use of measurement systems.

Course ā€œResidual stresses: How to detect, prevent and measure themā€

The course is organized by AIM (Associazione Italiana di Metallurgia) to address the issue of residual stress and to discuss some practical cases, giving a wide view of applications of the strain gage technique for measuring residual stresses. Emilioā€¦

New DRMS Cordless

Development of the new system for measuring drilling resistance of stone materials and mortars, the DRMS Cordless, has been completed. The new system, which is lighter and more versatile, has a number of new features. For details, see ā€œOff-the-shelfā€¦

New drills CT and CTT

This post is also available in: Italian

Ā© Copyright - SINT Technology s.r.l. | VAT n. IT04185870484 | Via delle Calandre, 63 50041 - Calenzano (FI) - ITALY | Tel: +39 055 8826302 | E-mail: info@sintechnology.com
Powered by Playnet